Tag Archives: marking of drill bits

FAQ: Does PGM also check the performance and durability of drill bits?

Performance and durability are no requirements for the use of the PGM mark. Therefore, the user has the choice between PGM marked hammer drill bits and rotary drill bits, which are suitable for safe anchor installation, with different quality and price levels.

Generally, the quality level of drill bits with PGM mark can be assumed as higher than those of unmarked drill bits, because reliable and quality focussed drill bit manufacturers are normally certified by PGM.

FAQ: Why are drill bits not marked with CE?

Products may only be CE marked, if they are in the scope of a relevant European Regulation or Directive. This is not the case with drill bits for the following reasons:

  • SDS hammer drill bits and percussion drill bits are not construction products. Although they are used on construction site, they are not installed into the building like for instance anchors. Therefore they are not in the scope of the European Construction Products Regulation  (Regulation 305/2011/EU).
  • SDS hammer drill bits and percussion drill bits are also no machines and are therefore not covered by the European Machinery Directive  (Directive 2006/42/EU).
  • The only European Directive applicable to drill bits and other tools like grinding tools, technical brushes, saw blades and hand tools is the General Product Safety Directive (GPSD, 2001/65/EC). But this directive does not foresee a CE mark.

For that reasons, drill bits may not be marked with CE.

Marking of PGM drill bits

PGM certified hammer drill bits (e. g. SDSplus, SDSmax) and masonry drill bits (rotary or percussion drill bits with cylindrical shank) are marked with PGM mar in addition with the name or trademark of the manufacturer and/or with a manufacturer code (two digit number or letter combination) as follows:

Sample Tools or   AB or   72

A marking only with the Inspection mark, without manufacturer name or combination of digits or letters, are not legal. If you are not sure, if a drill bit is marked correctly, please contact  pgm@pgm-online.org.